Vinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo SliderVinaora Nivo Slider



طابعات صور الأفلام

DRYPRo 873


مدة الطباعة الأولى حوالي 50 ثانية، اعلا سرعة طباعة في العالم، يعمل نظام إميدجر المذكور على طباعة 10 افلام مقاس 14×17 خلال 4 دقائق. وقدرة تسجيل عالية بفضل الوضع الأمثل لثبات الوحدة مع طباعة صورة عالية الجودة


The first printing time is about 50 seconds. With the world's fastest dash speed, this imager can print 10 sheets of 14"×17" -size film within 4 minutes. The sufficient recording capacity exerts its power for usual modalities as well. The excellent stability provides high-quality images.


1 607AkAA Fully compatible with five sizes and the world's smallest design*

The unit comes in less imposing compact body with 1150 mm in height and commands only 0.35m⊃2; for an installation area while providing five sizes of printing film raging from 14"×17" to 8"×10". Since it supports the main film sizes, it is possible to run a life-size printing operation. Also, it can support additional supply units of up to 3 trays. Film size can be selected depending on the purpose.

User-friendly quiet design

The excellent design means the unit emits less noise for a user-friendly working environment. The actual noise is turned to the lower tones with little high-frequency tones, making users feel the unit is quieter than the actual noise level. The overall noise, especially noise during the standby run, has been reduced. Even where the standby run is often used as an imager for the filmless era, it can provide a quiet working environment.

10 P5 738AA Provision of high-quality images

The image interpolation processing (pixel replication/function interpolation) has been enhanced, and intensity conversion processing has been adopted, which automatically recognizes images and letters in the images, executes proper processing, and displays smooth images and sharp letters.

Consistent quality finish

The DRYPRO 873 has an automatic density control function that prints constant exposure density batch onto the film, automatically measures the density with the built-in density meter, and controls the finishing density. Furthermore, the automatic calibration at film exchange enables image printing with consistent image quality.

Imaging Film SD-Q/SD-QM

As for films for CR/modality (SD-Q) and digital mammography, the silver ion capacity that is pivotal for image formation on dry films has been greatly boosted and the ingredients of developer have changed to achieve highly sensitive, fast developing. As a result, sharp, stable images are swiftly provided.

One pack of daylight package contains 125 sheets that can be handled under room light. Both blue base and clear base are available depending on the purpose.

14P3ch 643AA Reasons for fast printing. Fast heat developing process

With the DRYPRO 873, the developing process has been fully reviewed to respond to fast and mass volume processing. Pre-heating the film from the early stage of film transfer is to be implemented. In addition to reducing unstable temperature areas when heating films, fast mass volume processing and excellent density stability have been achieved by dividing the heat developing part into five parts and closely controlling the process. Ten sheets of 14"×17" -size film can be printed within four minutes.


It is fast so it small. Rapid cooling process

To increase the printing speed, in addition to increasing the speed of image formation, a completely new control has been added to the cooling process that comes at the end of printing. To rapidly cool films after image formation, a film temperature history control system that controls both heating and cooling has been adopted. By accurately halting and heat development and greatly increasing the cooling speed and time (some quarter) compared with previous equipment, stable quality images can be swiftly obtained even in centralized processing. In addition to the speed, the increased cooling speed has enabled the drastic downsizing of the unit, contributing to the compact body size.

It is small so it is fast. The shortest film pass structure

To realize the compact body and the fast/mass volume processing, the hardware for the DRYPRO 873 has been overhauled. Various approaches to the compact imager, such as adoption of feed roller of film supply unit and adoption of the plate-method heating unit, have contributed to creating the shortest film pass structure. Speed and compactness have been


Specifications for the DRYPRO MODEL 873


Laser Source Semiconductor laser
Film Size Selectable from 14"×17" / 14"×14" / 11"×14" / 10"×12" / 8"×10"
Film to be used Dry Image recording films, SD-Q / SD-QC / SD-QM
Image Format 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 25, 30, 35, 36, 42, 48, 54, 56, 60, 63, 64
Image Memory Compact flash memory (Standard 128MB)
Main memory (256MB)
Print memory (256MB)
Input port Maximum 16 ports
Matrix (14 x 17) REGIUS connection: 8079×9725 pixels (at 43.75μm)
Connection other than REGIUS: 7730×9260 pixels (at 43.75μm)
Matrix Size 78.6μm / 43.75μm
Image data input 8-bit, 12-bit
Output grades 16384 grades (14-bit)
Image Mode Pixel replication / function interpolation (with intensity conversion process function)
Processing capability 180 sheets/hour (mixed sizes/at ordinary modality)
Input interface Ethernet 1000base-T
DICOM Support DICOM Print Management Service Class, Presentation LUT Service Class …. (For details, refer to DICOM conformance statement)
Supply Two channels standard, maximum of three channels (option)
Standby function Transfers to energy-saving mode after pre-set time for none-printing Boot time from the energy-saving mode is less than three minutes.
Border processing Black / white
Image trimming frame Possible
Density correction function Built in the body
Negative / Positive Available
Noise level Less than 53 db when printing / less than 46 db in standby
Footprint 0.35m⊃2;
Operation conditions 15℃ to 30℃ (59F to 86F), 30% to 70% RH (no condensation)
Power UL : AC 120V±10%; 60Hz±1Hz 10A
CE : AC 220 - 240V±10%; 50/60Hz±1Hz 6A
Dimensions H1150×W599×D585mm
Weight : approx. 152kg (335lb)